5th Scale RC Products

This is a Scratch and Dent sale item. Grease leaked on the containers and stained them Not suitable for retail sale. The containers are full and the damage is cosmetic  Team FastEddy, in conjunction with a leading USA-based grease manufacturer...

Team Fast Eddy Replacement clutch bearings for the Losi 5ive-TClutch bearings are usually the first to go on any RC. Pick up a set or two for your tool box.Set of (2) High quality clutch bearings. (1)   Losi 5ive-T Clutch Bearing Set

Its darn near imposable to adjust the Losi 5ive servo saver while its in your rig. Its hidden deep down and the spring tension is heavy. Along with this on almost every rig, it will loosen up as you drive. Team FastEddy has addressed these issues with...

Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC. To much play can cause undue heat and alignment issues resulting in premature bearing failure.This kit contains 4 shims. 2 Units .1 and 2 units .3With...

Dogbone Boot Install Tool V2 For the HD 5SC Bones.This tool makes it a breeze to install boots onto your dogbones. V2 is designed to work with the thicker HD dogbones on the HPI Baja SC with 5mm Pins. (1)    Boot install tool V2 For HD SC...

Stainless steel plates that cover both the exhaust port and the intake port on your RC Gas Engine. Contamination is the largest engine killer. Its always best to cover your posts when the intake or exhaust is removes. Works great for storing engines. ...

Replacement Sealed Engine Bearing for CY/RC engines. Sold individually. (1)   Sealed Engine Crank Bearing

This is a Team FastEddy replacement One Way Bearing for the Baja Skunkworks 2-Speed. With the power being put out by the 2-Speed it only makes sense to have the replacemnet parts ready for it. Photo is for identification only. (1)   One way...

This is a Team FastEddy replacement One Way Bearing for the Baja Skunkworks Roto-Start. Roto-Starts are put through very rough conditions to where there has become a demand for the replacemnet parts. Photo is for identification only.   (1)  ...

Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...

Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...

Team FastEddy Thin Hinge Pin Shims Properly shimmed hinge pins are a must for anyone driving an HPI Baja or Losi 5ive-T. There is excessive play in all the  hinge pins. This allows the pin to slam back and forth and damage the c-clips. This is the...