5th Scale RC Products

Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC. To much play can cause undue heat and alignment issues resulting in premature bearing failure.This kit contains 4 shims. 2 Units .1 and 2 units .3With...

Team FastEddy Droop Screw Bump Stops for the Losi 5ive-T Droop screws play a large part in chassis tuning on the Losi 5ive-T. The droop screws are steel and the chassis is aluminum. It doesn't take long for the screws to gouge out and trash your chassis...

Team FastEddy Rear Toe Block 2° Toe 2° Anti Squat Until now there has been no way to adjust the rear toe on the Losi 5ive. With several choices of rear toe in you can now better tune your Losi 5ive for any track or bash outing. Team FastEddy now...

Team FastEddy Rear Toe Block 1° Toe 2° Anti Squat Until now there has been no way to adjust the rear toe on the Losi 5ive. With several choices of rear toe in you can now better tune your Losi 5ive for any track or bash outing. Team FastEddy now...

Description:Team FastEddy Rear Toe Block 0° Toe 2° Anti SquatUntil now there has been no way to adjust the rear toe on the Losi 5ive. With several choices of rear toe in you can now better tune your Losi 5ive for any track or bash outing. Team...

Replacement Wheel Bearing Set for the Losi 5ive-T (1)    Losi 5ive-T Wheel Bearing Set

Losi 5IVE-T RTR Sealed Bearing Kit (4)     9x20x6 (4)     10x15x4 (4)     12x24x6 (6)     15x24x5   Flanged (2)     15x28x7...

Dogbone Boot Install Tool V2 For the HD 5SC Bones.This tool makes it a breeze to install boots onto your dogbones. V2 is designed to work with the thicker HD dogbones on the HPI Baja SC with 5mm Pins. (1)    Boot install tool V2 For HD SC...

Stainless steel plates that cover both the exhaust port and the intake port on your RC Gas Engine. Contamination is the largest engine killer. Its always best to cover your posts when the intake or exhaust is removes. Works great for storing engines. ...

Replacement Sealed Engine Bearing for CY/RC engines. Sold individually. (1)   Sealed Engine Crank Bearing

This is a Team FastEddy replacement One Way Bearing for the Baja Skunkworks 2-Speed. With the power being put out by the 2-Speed it only makes sense to have the replacemnet parts ready for it. Photo is for identification only. (1)   One way...

This is a Team FastEddy replacement One Way Bearing for the Baja Skunkworks Roto-Start. Roto-Starts are put through very rough conditions to where there has become a demand for the replacemnet parts. Photo is for identification only.   (1)  ...